🏥先生にこれ聞けた！の報告会

[JamesElurn]

Where is the current INAV setup guide, not a three-year-old translation? I needed firmware 9.1, the Configurator and Getting Started for the flight controller. Found them at [url=https://inavflight.net]inavflight.net[/url] and that is what I am flashing.

[WillisLab]

Good afternoon!

Detailed information on the website https://www.durysnamui.lt/index.php?route=journal2/blog/post&journal_blog_post_id=9
Good luck!

[JamesElurn]

Where do you download Mission Planner now so it matches the firmware? Old forum dumps leave the board half-flashed. I take the ground station from here: [url=https://ardupilot.club/planner/index.html]Mission Planner[/url]. Then I flash Copter or Plane from the same site.

[JamesElurn]

First hover is where most of us crash. I read [url=https://ardupilot.club/copter/docs/flying-arducopter.html]First Flight and Tuning[/url] after setup, then Autotune. Stabilize and AltHold before Loiter.

[snos zdaniy 371]

снос кирпичного здания демонтаж зданий домов

[snos zdaniy 756]

демонтаж зданий демонтаж зданий домов

[JamesElurn]

Mission Planner and the matching firmware have to come from one place or the versions drift. I take both from [url=https://firmware.ardupilot.club/Tools/MissionPlanner/]Mission Planner download[/url] and then pick Copter or Plane in Setup.

[JamesElurn]

QGroundControl is fine on a Mac. On Windows I still use Mission Planner. The GCS list I used is [url=https://ardupilot.club/copter/docs/common-GCS.html]Ground Control Stations[/url]. Firmware still comes from the ArduPilot wiki either way.

[JamesElurn]

Building a wing, not a quad. Plane firmware, first setup and Mission Planner are on [url=https://ardupilot.club/plane/index.html]Plane docs[/url]. I would not flash Copter onto a fixed wing and hope for the best.

[JamesElurn]

Pixhawk first run: I followed [url=https://ardupilot.club/copter/docs/common-pixhawk-overview.html]Pixhawk Overview[/url] for the board, then Mission Planner for the firmware and calibration. Do the accel and compass on the bench, not in the grass.

[JamesElurn]

Need a boat or a rover, not a copter. The wiki I used is [url=https://ardupilot.club/rover/index.html]Rover docs[/url]. Same Mission Planner, different firmware, and the first drive notes are on that page.

[GichardThorm]

I enjoy how this post combines a natural tone with clear structure because it makes the discussion feel more genuine and accessible overall.

ONLYFANS PORNHUB NUDES VIDEO FOR SALE

[nstoneFep]

гранитная плитка 600х600
naturalnyj-kamen-moskva.site
гранитная плитка 600х600

[JamesElurn]

GPS has to sit still before the first flight or Loiter is a mess. I used [url=https://ardupilot.club/copter/docs/common-positioning-landing-page.html]GPS/Compass[/url] for the modules and the Mission Planner checks. After a 3D fix the rest of the setup is normal.

[nstonexFep]

гранитная плитка 600 300 купить
naturalnyj-kamen-moskva.site
сколько стоит известняк

[投稿者]

投稿